Bead and Butt
Product customizationDon't forget to save your customization to be able to add to cart
Important Notice Regarding Custom Made Products
Our MDF shaker doors are made using moisture resistant MDF and jointed using the traditional mortice and tenon technique.
Available in any size within our limits of 2350 high and 650 wide. We do offer wider and taller options but they are available by inquiry only.
The standard rail size on these doors is 75mm but you can opt for a custom size using the options above.
Hinge drilling options are available and using the options above you can enter your own positions or just opt for standard positions, these are usually 100mm top and bottom and then if your door requires more hinges, we space these extra holes evenly between the top and bottom.
Doors under 1500mm in height will have a single panel with no mid rail.
Doors between 1500 and 1700 will have 2 panels, but at an equal split.
Doors from 1700mm upward will feature a 60/40 2 panel setup.
Drawer fronts or doors with a standard rail size of 75mm that are below 199mm in height or width will not feature any shaker panel.
If you select custom size rails, your doors will only feature a shaker panel if your door is equal to the following guide: rail size x 2 + 50mm
Example: (Rail size of 50 x 2) + 50 = 150. If your door has 50mm rails, your door must be over 150mm in height and width to feature a shaker panel.